PRODUCTS

Showing 1–10 of 68 results

  • Sale!

    Montana – PBN Audio M Series 2!5S in exotic Zebrawood finish

    $30,000.00

    This is the D’apolito version of this M series highly efficient Loudspeaker. Precision-made cabinet with a faceplate of 1.75 in. Layered MDF. Highly engineered inner chambers designed to produce the most accurate measurable audio reproduction in the world. Twin 15 in. woofers with with a low-loss magnetic structure and Symmetrical Field Geometry matched to internal enclosures for producing accurate mid-bass. Mid-range/tweeter compression driver with dual-diaphragms. The drivers are aligned “in time” via their amazing 900 Hz charge-coupled crossovers, profiling the exquisite precision of their design. Comes complete with PBN’s proprietary 30 db per octave acoustical crossover slopes. Plus, there are five precision hand-wound inductors. 12 High-Voltage Metalized Polypropylene Capacitors LF: 2 each 15” Woofers MF/HF: 1 each Dual Diaphragm Compression Driver mounted on WaveGuide Crossover: 5th Order Charge coupled with 3 x 9V (27V) @ 900 Hz Crossover Capacitors: High Voltage (400VDC) Metalized Polypropylene Sensitivity: 95dB / 2.83V /1M Frequency Response: 25Hz to 20kHz +/- 2dB Impedance Nominal: 4 Ohms (min. 3.5 Ohms, max. 9 Ohms) Dimensions 61.5H x 22.5W x 23.5D Weight: 290 lbs

    More Info
  • Sale!

    Montana – PBN Audio M Series M2!5 in Piano Black finish Like New! What a Great Dynamic Speaker!!!

    $20,000.00
    • Precision-made cabinet with a faceplate of 1.75 in. Layered MDF. Highly engineered inner chambers designed to produce the most accurate measurable audio reproduction in the world.
    • Twin 15 in. woofers with with a low-loss magnetic structure and Symmetrical Field Geometry matched to internal enclosures for producing accurate mid-bass.
    • Mid-range/tweeter compression driver with dual-diaphragms. The drivers are aligned “in time” via their amazing 900 Hz charge-coupled crossovers, profiling the exquisite precision of their design.
    • Comes complete with PBN’s proprietary 30 db per octave acoustical crossover slopes. Plus, there are five precision hand-wound inductors.
    • 12 High-Voltage Metalized Polypropylene Capacitors
    • Driver Complement:
    • LF: 2 each 15” Woofers
    • MF/HF: 1 each Dual Diaphragm Compression Driver mounted on WaveGuide
    • Crossover: 5th Order Charge coupled with 3 x 9V (27V) @ 900 Hz
    • Crossover Capacitors: High Voltage (400VDC) Metalized Polypropylene
    • Sensitivity: 95dB / 2.83V /1M
    • Frequency Response: 25Hz to 20kHz +/- 2dB
    • Impedance Nominal: 4 Ohms (min. 3.5 Ohms, max. 9 Ohms)
    • Dimensions 53″H x 18″W x 23″D
    • Weight: 280 lbs
    More Info
  • Sale!

    PBN Audio EBSA-2 WORLD CLASS Stereo “Classe A” Amplifier 1 year old – Like NEW

    $20,000.00
    • This unit was in a system for 1 year and then replace with the EBSA3 Mono Blocks.
    • Power Output 650 WPC, both channels driven into a 8 Ohm load @ less than 0.1 % THD
    • ower Output 1200 WPC, both channels driven into a 4 Ohm load @ less than 0.1 % THD
    • Power transformer 4000 VA
    • Power Supply capacitance 800000 uF
    • Signal to noise ratio 110dB
    • Gain 32 dB
    • Inputs: Balanced (3K3 Ohm) and PBN proprietary 75 Ohm BNC (Must be driven by a fully balanced pre-amplifier)
    • Power Consumption at idle 550W in high bias, 275W in low bias
    • Outputs: 2 set WBT 763, 5-way binding posts per channel
    • Size: 19″ W x 15.5″ H x 16.25″D
    • Weight: 165 Lbs

    EB-SA AMPLIFIERS

    The coiled lightning of the EB-SA series redefines the term “amplifier”

    The only way to insure meeting the highest standard for PBN’s audio systems was to engineer and build our own amplifiers and pre-amplifiers. The carefully integrated audio components work together seamlessly to create a synergy of excellence. A defining, inflexible tenet followed for each element – every diode, every capacitor – is to insist on the best, without exception.

    The result: The now complete EB-SA series, a trio of PBN components that redefine the term “amplifier”. (The “EB” is an homage to Erno Borbely, the legendary Norwegian-Hungarian sound engineer who collaborated closely with Noerbaek on the earlier forms of the series.) The precisely balanced electronic network of each EB-SA amp provides the right pulse of energy at each point of need. The entire system hovers with nearly unlimited power to breathe life into every sound, no matter how delicate or subdued—or to unleash the full potential of any crescendo. EB-SA soundscapes are unbelievably immaculate; there is no “noise”…only deep, pure, gorgeous sound.

    More Info
  • Sale!

    PBN Audio Olympia LXis Preamplifier w/CPSi Power Supply & NEW Volume, Display & Grounding updates

    $16,000.00

    The Olympia-LXi preamp is an all-FET design with an external full size CPSi power supply (18.5″W x 4.25″H x 14.25″D) It has an updated Digital Display and Volume Control with a NEW grounding circuit and New Style metal remote. 

    • All-FET circuit design with external CPS power supply (two 375VA transformers)
    • High-capacity energy storage — 80k uF filter capacitance
    • Eight heavy-duty filtering chocks for extremely precise and clean current supply
    • Four balanced inputs and two RCA inputs. Balanced, RCA and 75 Ohm BNC output for use with PBN’s proprietary impedance-matched interconnect system
    • Unit features two Caddock™ Resistors in the feedback loop
    • Remote control for volume and mute included
    • Pre-Amp: 19″W x 4.5″H x 15″D Power Supply: 9.5″W x 4.5″H x 15″D

     

    More Info
  • Sale!

    PBN Audio – Olympia EB-SA1 Super Amplifiers / Silver with meters

    $16,000.00
    Inspired by Erno Borbely, consider the EB-SA1 the culmination in a continual evolution of efficiently-sized, optimal-performance amplifiers. Dimension-for-dimension, watt-for-watt, it simply does not get any better than this! With over 130 clean watts of power and an output stage that supports six pairs of devices per channel, this is the mightiest small amplifier in today’s marketplace. In total, 95 pounds of high-octane audio power just waiting to be unleashed on your system. Consider this amplifier your ultimate audio destiny—for you will hear what you’ve never heard before—The holy grail of audio nirvana.
     
    TECHNICAL FEATURES
    • Two-Channel All-FET circuit design utilizing a 1500VA transformer
    • 225,000 uF power supply capacitance
    • 130 watts of clean power @ eight Ohm load per channel
    • High-quality onboard regulators in voltage gain section
    • Output stage features: six pairs of closely matched output devices x2
    • Inputs: Balanced, RCA and 75 Ohm BNC.  WBT: binding posts x 8
    • Amplifier can be bridged in Differential Mode: 450 Watts into an eight Ohm
    • Requires a fully differential pre-amplifier if used as a mono-block
    • High-quality 20 Amp power cord included
    • Size: 19″ W x 9.25″ H x 15″ D
    • Weight: 95 pounds each
    More Info
  • Sale!

    PBN Audio Montana – Sammy’s Innerchoic Loudspeakers in Cherry

    $14,000.00

    These Sammy’s are a great buy for one outstanding speaker. They utilize some of the best drivers on the market, let alone their amazing cabinet. These have a little cosmetic cracking on the back veneer. “There’s something greater at work here: SONIC SUBSTANCE,” was the praise lauded on our Sammy Loudspeaker by Sound Stage’s critic Jeff Fritz. Critic after critic cannot believe the audio presence and purity of this remarkable speaker. Each cabinet is built from a series of stacked rib-frames whose interior nooks and crannies act as an internal anechoic chamber. That’s why we’ve named it an “innerchoic” design. It totally traps all the unwanted sound waves while expelling an audio purity that heretofore was unheard…and unheard of. But now you can hear it — which is baffling in itself. 

    More Info
  • Sale!

    PBN Audio DP-80 Pro Turntable in Walnut w/Ortofon Cadenza Black and SME 4.5 arm. 1 year old!

    $12,500.00

    DP80 GROOVEMASTER VINTAGE DIRECT PROFESSIONAL

     This unit was delivered by PBN / Sound Station and was in light use for only one year. It was replaced by the upgrade PBN-DN308.

    Again only handled by PBN Sound Station. It comes with an Ortofon Cadenza Black Cartridge and a SME 4.5 arm.

    The PBN-DN80 is a more compact companion to the PBN-DN308.  It boasts the same extraordinary prowess and refined electronics. Both models are fully recalibrated to all the original specifications. The motor and platter are from the original, as are some of the console elements. It is in a custom-finished Walnut finish chassis. Everything is tested and retested for peak performance. Each of these superb turntables has its own unique history, and we share that when we have good information. 

    • Specifications PBN-DP80
    • Speeds 33.333 and 45.000rpm @ 0.002%
    • Bi-directional Servo Speed Control System
    • 2” Ball Bearing Vibration Control Footers
    • Up to 2 10” tonearms can be mounted
    • Dimensions: 19.25” W x 15.25” D by 7.75” H (to top of platter)
    • Weight: Approx. 55 Lbs.
    More Info
  • Sale!

    PBN Audio Montana M1!5 in Satin Black

    $12,250.00

    The M1!5 features twin 12-inch woofers designed by a master engineer working closely with Peter Noerbaek, producing an advanced version of its widely celebrated predecessor. The compression driver features the same phase plug as that used in the the most refined drivers and is integrated masterfully in the M2!5, with its virtually peerless high-frequency soundscape.

    • Sensitivity: 94dB/2.83V/1M
    • Impedance: nominal 4 Ohms
    • Frequency Response: 30Hz to 25kHz
    • Power Handling: 300W
    • Driver Complement:
      LF = 2 x 12” woofers
      HF = 1” Compressor Driver mounted on WaveGuide with 90’H 50’V dispersion
    • Crossover Frequency: 1.2 kHz LKRY 6th order up / 1.3kHz BTW
    • 5th order down charge coupled with 27VDC
    • Size: 14’W x 19”D x 42.5”H
    • Weight: 155 Lbs
    More Info
  • Sale!

    PBN Audio Olympia LXi Preamplifier w/CPSi Power Supply in black. Sounds Great!

    $10,000.00

    This unit has been back to PBN Audio for a complete update. It has the new Volume control circuit and an updated grounding system.

    The Olympia-LXi preamp is an all-FET design with an external full size CPSi power supply (18.5″W x 4.25″H x 14.25″D) 

    • All-FET circuit design with external CPS power supply (two 375VA transformers)
    • High-capacity energy storage — 80k uF filter capacitance
    • Eight heavy-duty filtering chocks for extremely precise and clean current supply
    • Three balanced inputs and two RCA inputs. Balanced, RCA and 75 Ohm BNC output for use with PBN’s proprietary impedance-matched interconnect system
    • Unit features extensive use of Caddock™ Resistors
    • Remote control for volume and mute included
    • Pre-Amp: 19″W x 4.5″H x 15″D Power Supply: 9.5″W x 4.5″H x 15″D

     

    More Info
  • Sale!

    Montana – PBN Montana DD-12 for Paul Stooky Concert at C.E.S. 2012

    $10,000.00

    The PBN Audio Model DD-12 was a collaboration between Peter Noerbaek (PBN Audio), Dean Rivera a 25 Year Veteran of JBL, Cary Audio Design and T.H.E. Show in association with Neworld Multimedia Entertainment. The speaker was debuted at the 2012 CES / T.H.E. Show in Las Vegas for the Paul Stookey Concert of Peter, Paul and Mary fame. The sound was excellent! A pair of speakers like these are hard to believe. Even on a basic system, these speakers are beyond almost any extreme high end speaker I have heard. Even in a large room, these will blow your doors off. The only way to truly understand these are to hear them. These beauties sound amazing, very neutral to source, fast, with great bass and amazing vocals via the horn. The Horn lens is custom made for the DD12 and is fitted with a JBL 2435HPL Beryllium Compression driver. The DD12 is a true 25Hz transmission line (11.4ft long) with two 12″ woofers scooping into a common line, the line has a completely linear and smooth taper from 120% of SD to 20% of SD, textbook and beyond 😉 The woofers are fitted with Neodymium magnets in place of the more common ferrite magnet structures. They were custom designed and made for PBN audio by dB design (Dean Rivera from JBL). The cabinet construction is extremely complex and very expensive and time consuming to produce (see photo of the inside). These are high sensitivity speakers which can play very loud even with small tube amps or small solid state amps yet still can handle up to 450 watts each. To produce this speaker again would be far in excess of the original retail price of $25,000 Frequency Response (-6dB): 35Hz – 16kHz Power handling: 450 watts Impedance: 6 Ohm Dual 12-inch woofer with 80 x 60 Horn Transmission Line design Single wire with standard 5 way post. 20”w x 30”d x 58”h. 265 lbs each

    More Info